The five major HPLC components and their functions

HPLC chromatography: The five major hplc components

The five major HPLC components and their functions

In a previous post entitled “What is Liquid Chromatography? What is HPLC (High Performance Liquid Chromatography)” the LC and the HPLC analytical techniques were introduced and the main advantages and disadvantages were explained.

The five major HPLC components and their functions are going to be presented in this post:

 

The Pump:

The role of the pump is to propel (force) a liquid (the mobile phase) through the chromatograph at a specific flow rate, expressed in ml/min. Normal flow rates in HPLC are 1-2 ml/min and typical pumps can reach pressures in the range of 2000 – 9000 psi but in applications covered under UHPLC mode operating pressure can be as high as 15000-18000 psi. The normal flow rate stability must be < 1%.

 

HPLC pump

An ideal pump should have the following characteristics:

  • Solvent compatibility and resistance to corrosion
  • Constant flow delivery independent of back pressure
  • Low dead volume for minimum problems on solvent changeover

The main types of pumps used in HPLC (or in LC) are the following:

  • Constant Pressure Pumps : Provide consistent continuous flow rate through the column with the use of pressure from a gas cylinder.
  • Constant Flow Pumps: a) Reciprocating Piston pumps deliver solvents through reciprocating motion of a piston in a hydraulic chamber. The main drawback of a reciprocating pump is that it produces a pulsing flow. With a flow-sensitive detector, such as micro-adsorption detector, a pulse damping system must be used and detector sensitivity is reduced. b) Syringe type pumps are suitable for small bore columns. Constant flow rate is delivered to column by a motorized screw arrangement.

The pump should be inert to solvents, buffer salts and solutes. They are made of stainless steel, titanium and resistant minerals.

There are two types of pump operation:

  • Isocratic pump -  delivers constant mobile phase composition
  • Gradient pump – delivers variable mobile phase composition

 

The Injector:

The sample should be introduced as a plug, without disturbing the column packing. The injector serves to introduce the liquid sample into the flow stream of the mobile phase. Typical sample volumes are 5-20 μL. The injector must be able to withstand the high pressure of the mobile phase. A precolumn, a small removable section of tubing containing the same packing material as the column, can be used ahead of the analytical column to protect the latter from contamination. The precolumn also acts as a buffer to prevent channeling of the packing during injection.

 

The Column:

The column is considered the heart of the chromatograph. The success or failure of a particular analysis depends on the choice of column. The column’s stationary phase separates the sample components using various physical and chemical parameters.

There are four types of columns used in HPLC:

  • High performance analytical columns [internal diameter (i.d.) 1.0-4.6 mm; lengths 15 –250 mm] - used mainly for qualitative and quantitative analysis
  • Preparative columns (i.d. > 4.6 mm; lengths 50 –250 mm) – used mainly for preparative work
  • Capillary columns (i.d. 0.1 -1.0 mm; various lengths) 
  • Nano columns (i.d. < 0.1 mm)

HPLC column

The tubing used for the construction of columns can be:

  • Glass – mostly for biomolecules
  • Stainless steel – the most popular;  can withstand high pressures
  • PEEK polymer – chemically inert to most solvents and biocompatible

Columns are packed with small diameter porous particles. Usually the size of the porous materials used are 1,6 – 5 μm. The column packings used in liquid/solid chromatography (LC, HPLC) are silica gel, charcoal and alumina. Most users purchase pre-packed columns to use in their liquid chromatographs. These porous particles in the column usually have a chemically bonded phase on their surface which interacts with the sample components to separate them from one another – for example, C18 is a popular bonded phase. The process of retention of the sample components is determined by the choice of column packing and the selection of the mobile phase to push the analytes through the packed column.

 

The Detector:

 

The Gradient Device:

Relevant Posts

What is reversed phase liquid chromatography (LC) / HPLC?

Normal phase liquid chromatography (LC) / HPLC?

Which are the main liquid chromatography separation modes? / Liquid-Liquid Chromatography (LLC)

Selection of the Liquid Chromatographic (LC) / HPLC Separation Mode

Troubleshooting HPLC / Liquid Chromatography Systems – Peak Tailing

References
  1. Nina Hadden et al., “Basic Liquid Chromatography”, Varian Aerograph, 1971
  2. C.A. Dorschel, J.L. Ekmanis, J.E. Oberholtzer  et al. “LC Detectors” Anal. Chem., 61, 951A–968A, 1989
  3. C. F. Simpson, “Techniques in Liquid Chromatography” Wiley-Hayden: Chichester, England, 1982
  4. L.R. Snyder, J. L Glajch,  J. J. Kirkland, “Practical HPLC Method Development”, Wiley-Interscience: New York, 1988.
  5. V.R. Meyer, “Practical High – Performance Liquid Chromatography”, Wiley, 2010
  6. M. McMaster, “LC/MS A Practical User’s Guide”, Wiley-Interscience, 2005
Key Terms
HPLC, high performance liquid chromatography, pump, hplc column, injector, detector, capillary column, isocratic pump

Comments

Post a Comment

Popular posts from this blog

Carbocations: Factors affecting their Stability

Image
A carbocation is a species where a carbon atom bonds to three carbon atoms and has a positive charge. Carbocations are electron deficient species and therefore very reactive and unstable . Anything which donates electron density to the electron-deficient center will help to stabilize them. Factors that stabilize them are the following:  Neighboring carbon atoms (inductive effect) Neighboring carbon-carbon multiple bonds (resonance effect) Neighboring atoms with lone pairs (resonance effect) How carbocations are stabilized by neighboring carbons atoms? The stability of carbocations decreases as the number of carbons attached to the C+ decreases. That means that tertiary carbocations are more stable than secondary that in turn are more stable than primary (Fig. 1). Fig. 1: Carbocation stability increases as methyl substitution increases around the electron deficient carbon C+. The methyl groups (-CH 3 ) are electron donating and therefore stabilize the positive charge (inductive ...
Read more

Standard Enthalpies of Formation of Organic Compounds

Standard Enthalpies of Formation of selected organic compounds Home > Fundamental Physical Constants - Chemical - Physical - Thermochemical Data > Standard Enthalpies of Formation of Inorganic Compounds > Standard Enthalpies of Formation of Organic Compounds Standard Enthalpies of Formation of Organic Compounds   The standard enthalpy of formation ΔΗ° f of a substance is the change in enthalpy for the reaction that forms 1 mol of the substance from its elements with all reactants and products at 1 atm pressure and usually 298.15 K. For any element in its most stable state at 298 K and 1 atm pressure, ΔΗ° f = 0. Standard enthalpies of formation of inorganic compounds were given in a previous post.   Table 1: Standard Molar Enthalpies of Formation ΔΗ° f at 25 °C (298.15K) Substance Formula ΔΗ° f   Acetylene C 2 ...
Read more

CHEMISTRY NET - INTRODUCTION - LIST OF TOPICS

Chemistry Net - Introduction - Table of Contents CHEMISTRY NET Analytical Chemistry Biological Chemistry Inorganic Chemistry Organic Chemistry Physical & Theoretical Chemistry Chemical News & Interesting / Chem. Data Chemistry is the understanding, the definition and the description of the structure and the behavior of matter, the matter that surrounds us and the matter we are consisting off. It is our history, our life and our future. It is sometimes called the central science because of its role in connecting the other physical sciences (physics, astronomy, earth sciences) with the life sciences (biology, medicine) and engineering. There are many approaches to studying this fascinating science but for convenience and historical reasons has been divided it into five fields: analytical , biological , inorganic , organic and physical chemistry. Chemistry is a challenging subject to teach and even more challenging to learn. This si...
Read more