Standard Buffer Solutions - Preparing alkaline Borate Buffers

Standard Buffer Solutions -Preparing alkaline Borate Buffers
Home > Fundamental Physical Constants - Chemical - Physical - Thermochemical Data > Buffer Solutions - How to prepare buffer solutions > Preparing Standard Buffer Solutions -Phthalate Acid and Neutralized Buffers > Standard Buffer Solutions -Phosphate Buffer > Standard Buffer Solutions -Preparing Na Acetate Buffers > Standard Buffer Solutions -Preparing Alkaline Borate Buffers

 

Standard Buffer Solutions -Preparing Alkaline Borate Buffers

In a previous post entitled "Buffer Solutions - How to prepare buffer solutions" the basic steps for preparing buffers were presente d. It was shown that it is possible to prepare buffer solutions that maintain the pH close to any desired value by the proper choice of a weak acid and its conjugate base and their relatitive concentrations.

The following steps can be used to prepare different buffers:

  • Determine the optimal pH (the required pH)
  • Select a weak acid with a pka near the desired pH
  • Calculate the ratio of salt to acid required to produce the desired pH (Henderson-Hasselbach equation): pH = pka - log [HA]O/[A-]O
  • Determine the desired buffer capacity of the solution
  • Calculate the total buffer concentration required to produce this buffer capacity ß (Van Slyke equation): ß = 2.3* C* (ka * [H3O+]) / (ka + [H3O+] )2
  • Determine the pH and the buffer capacity of the final buffer solution using a reliable pH meter.

As an example it was described how to prepare phosphate buffer solutions and acetate buffers. In this post it will be shown how to prepare an alkaline borate buffer (pH 8.0 to 10.0).

 

Borate buffer (alkaline)

  • Prepare the following solutions:

Boric Acid and Potassium Chloride, 0.2 M:

  1. Dissolve 12.37 g of boric acid (H3BO3) and 14.91 g of potassium chloride (KCl) in water and dilute with water to 1000 ml.

Sodium Hydroxide , 1 M:

  1. Dissolve 162 g of sodium hydroxide in 150 ml of carbon dioxide-free water, cool the solution to room temperature and filter through hardened filter paper. Transfer 54.5 ml of the clear filtrate to a tight, polyolefin container, and dilute with carbon dioxide-free water to 1000 ml.
  2. Standarize the above solution as follows: Accurately weigh about 5 g of potassium biphthalate, previously crushed lightly and dried at 120 C for 2 hours, and dissolve in 75 ml of carbon dioxide-free water. Add 2 drops of phenolphthalein and titrate with the sodium hydroxide solution to the production of a permanent pink color.

M = g KHC8H4O4 /( 0.20422 * ml NaOH solution) (M, Molarity of solution)

Sodium Hydroxide, 0.2 M:

  1. Prepare a 0.2 M NaOH solution: Dilute appropriatelly the 1 M NaOH solution
  • Place 50 ml of the boric acid and potassium chloride solution in a 200 ml volumetric flask
  • Add the specified volume of the 0.2 M NaOH solution shown in the table below
  • Add water to volume and mix.

Table 1: Alkaline Borate Buffer - Standard Buffer Solution
pH0.2 M NaOH (ml)0.2 M Boric Acid & Potassium Chloride solution (ml)
8.03.950
8.26.050
8.48.650
8.611.850
8.815.850
9.020.850
9.226.450
9.432.150
9.636.950
9.840.650
10.043.750

References

  1. CRC Handbook of Chemistry and Physics, 52nd edition, The Chemical Rubber Co., (1971)
  2. U.S. Pharmacopeia, 68, USP 36
  3. David W. Oxtoby, H.P. Gillis, Alan Campion, “Principles of Modern Chemistry”, Sixth Edition, Thomson Brooks/Cole, 2008
  4. Steven S. Zumdahl, “Chemical Principles” 6th Edition, Houghton Mifflin Company, 2009

Key Terms

preparing standard buffer solutions, borate buffer, buffers, 10 buffer,

Comments

Post a Comment

Popular posts from this blog

Carbocations: Factors affecting their Stability

Image
A carbocation is a species where a carbon atom bonds to three carbon atoms and has a positive charge. Carbocations are electron deficient species and therefore very reactive and unstable . Anything which donates electron density to the electron-deficient center will help to stabilize them. Factors that stabilize them are the following:  Neighboring carbon atoms (inductive effect) Neighboring carbon-carbon multiple bonds (resonance effect) Neighboring atoms with lone pairs (resonance effect) How carbocations are stabilized by neighboring carbons atoms? The stability of carbocations decreases as the number of carbons attached to the C+ decreases. That means that tertiary carbocations are more stable than secondary that in turn are more stable than primary (Fig. 1). Fig. 1: Carbocation stability increases as methyl substitution increases around the electron deficient carbon C+. The methyl groups (-CH 3 ) are electron donating and therefore stabilize the positive charge (inductive ...
Read more

Standard Enthalpies of Formation of Organic Compounds

Standard Enthalpies of Formation of selected organic compounds Home > Fundamental Physical Constants - Chemical - Physical - Thermochemical Data > Standard Enthalpies of Formation of Inorganic Compounds > Standard Enthalpies of Formation of Organic Compounds Standard Enthalpies of Formation of Organic Compounds   The standard enthalpy of formation ΔΗ° f of a substance is the change in enthalpy for the reaction that forms 1 mol of the substance from its elements with all reactants and products at 1 atm pressure and usually 298.15 K. For any element in its most stable state at 298 K and 1 atm pressure, ΔΗ° f = 0. Standard enthalpies of formation of inorganic compounds were given in a previous post.   Table 1: Standard Molar Enthalpies of Formation ΔΗ° f at 25 °C (298.15K) Substance Formula ΔΗ° f   Acetylene C 2 ...
Read more

CHEMISTRY NET - INTRODUCTION - LIST OF TOPICS

Chemistry Net - Introduction - Table of Contents CHEMISTRY NET Analytical Chemistry Biological Chemistry Inorganic Chemistry Organic Chemistry Physical & Theoretical Chemistry Chemical News & Interesting / Chem. Data Chemistry is the understanding, the definition and the description of the structure and the behavior of matter, the matter that surrounds us and the matter we are consisting off. It is our history, our life and our future. It is sometimes called the central science because of its role in connecting the other physical sciences (physics, astronomy, earth sciences) with the life sciences (biology, medicine) and engineering. There are many approaches to studying this fascinating science but for convenience and historical reasons has been divided it into five fields: analytical , biological , inorganic , organic and physical chemistry. Chemistry is a challenging subject to teach and even more challenging to learn. This si...
Read more