Rates of Chemical Reactions and the Collision Model

rates of chemical reactions and the collision model
Home > Rate of a Chemical Reaction - Chemical Kinetics > Rates of Chemical Reactions and the Collision Model

 

Rates of Chemical Reactions and the Collision Model

 

Reaction rates are affected both by reactant concentrations and by temperature. The collision model, that is based on the kinetic-molecular theory, explains for both of these effects at the molecular level. In general only a small number of reactant collisions leads to products (in certain cases 1 in 1013 collisions).

The basic principles of the collision model (collision theory) are as follows:

  • Molecules must collide to react – Collisions are necessary to transfer kinetic energy, to break reactant chemical bonds and form product bonds
  • The greater the number of collisions per second the greater the reaction rate – This agrees with the observation that as reactant concentration increases the rate of a reaction increases since the number of collisions increases. It also agrees with the observation that as temperature increases molecular velocities also are increased and therefore collision frequency and reaction rate is increased
  • Proper orientation of colliding molecules is essential for a reaction to occur – In most reactions, molecules must be oriented in a certain way during collision for a reaction to occur. The relative orientation of the molecules during collision facilitates bond formation between certain atoms (Fig I.1 and Fig. I.2)

 

Fig. I.1: Fig. I.1: The collision shown above is effective since it brings together Cl atoms to form Cl<sub>2</sub>

 

 

Fig. I.2: The collision shown above is ineffective since Cl collides with O and the product formed decomposes to form the reactants Cl and NOCl

 

  • Molecules must collide with enough energy (activation energy) for a reaction to occur – Upon collision the kinetic energy of the molecules is used to stretch, bend and finally break bonds leading to chemical reactions. Svante Arrhenius suggested that molecules must posses a minimum amount of energy for the reaction to occur that is called activation energy.
Fig. I.3: Energy profile for the reaction of H2 and Cl2 to form HCl. The minimum energy required for the reaction to occur is called activation energy. The unstable molecule at the top of the energy profile is called activation complex or the transition state

 

In general, the rate of a chemical reaction can be expressed as:

Rate of reaction = (number of collisions per unit time) * (fraction of reactants with sufficient energy) * (fraction of reactants with proper orientation)

The four above collision model principles are incorporated into the Arrhenius equation:

k = A * e-(Ea/RT)  (Arrhenius equation)   (1)

 

Where, k is the reaction rate constant

Ea is the activation energy

R is the gas constant (8.314 J/mol.K)

and T is the absolute temperature

A is the frequency factor, a constant related to the frequency of collisions and the probability that the collisions are favorably oriented

 

As the activation energy of a reaction increases the reaction rate constant k decreases because the fraction of the molecules that possess the required energy is smaller.

 

 

Determination of Activation Energy and the Arrhenius Equation

Using a Graph:

 

The activation energy Ea of a reaction can be calculated by taking the natural logarithm ln at both sides of the Arrhenius equation:

k = A * e-Ea/RT   and  lnk = ln(A * e-Ea/RT) and  lnk = ln(A * e-Ea/RT) = lnA – Ea/RT

 

lnk =  – Ea/RT + lnA      (2)

           y = mx + b        (3)

 

Equation (2) has the form of the equation of a straight line (3). Therefore, a plot of lnk versus 1/T is a straight line with a slope m  = – Ea/RT

The activation energy of the reaction can be determined experimentally by measuring k  at a series of temperatures, plotting a graph of lnk versus 1/T and calculating Ea from the slope of the line.

 

Using a Non-Graphical method:

Equation (2) can also be used to calculate Ea if we know the rate constant of a reaction at two different temperatures.

Let us see the following example:

 

Example I.1

The rate constant of a reaction is k=2.52*10-5 at a temperature 189.7 °C. When the reaction temperature is 251.2 °C the rate constant of the reaction is k=3.16*10-3. Determine the activation energy Ea of the reaction.

By applying equation (2) twice at the following temperatures:

T1 = 273.15 + 189.7 = 462.85 K                    k1=2.52*10-5         

T2 = 273.15 + 251.2 =524.35 K                      k2=3.16*10-3

 

lnk =  – Ea/RT + lnA      (2)

lnk1 = – Ea/RT1   (4) and

lnk2 = – Ea/RT2    (5)

 

 By subtracting and rearranging (4) and (5) we get:

 

k1 = – Ea/RT1    (4) and

ln  k1 / k2 =  (Ea/R)(1/T2 – 1/T1) and

 ln (2.52*10-5)/( 3.16*10-3) = (Ea/[8.314) * (1/524.35 – 1/462.85)] and

  ln (2.52*10-5)/( 3.16*10-3) = [(Ea/8.314) * (-2.5*10-4)] and

  ln (2.52*10-5)/( 3.16*10-3)] = [(-2.5*10-4) *Ea / 8.314]   and

Ea = -4.83 * 8.314 /((-2.5*10-4) = 160626 J/mol = 160.6 kJ/mol

 

 

Relevant Posts - Relevant Videos

Rate of a Chemical Reaction - Chemical Kinetics

How to determine the order of a reaction by the initial rates method?

 

References

  1. J-L. Burgot “Ionic Equilibria in Analytical Chemistry”, Springer Science & Business Media, 2012
  2. J.N. Butler  “Ionic Equilibrium – Solubility and pH calculations”, Wiley – Interscience, 1998
  3. Clayden, Greeves, Waren and Wothers “Organic Chemistry”, Oxford,
  4. D. Harvey,  “Modern Analytical Chemistry”, McGraw-Hill Companies Inc., 2000
  5. J.N. Spencer et al., “Chemistry structure and dynamics”, 5th Edition, John Wiley & Sons, Inc., 2012 E. C. McGoran, J. Chem. Educ., 68, 19-23 (1991

Key Terms

reaction rates, reactant concentration, activation energy, collision model, collision theory

 

 

 

Comments

Post a Comment

Popular posts from this blog

Carbocations: Factors affecting their Stability

Image
A carbocation is a species where a carbon atom bonds to three carbon atoms and has a positive charge. Carbocations are electron deficient species and therefore very reactive and unstable . Anything which donates electron density to the electron-deficient center will help to stabilize them. Factors that stabilize them are the following:  Neighboring carbon atoms (inductive effect) Neighboring carbon-carbon multiple bonds (resonance effect) Neighboring atoms with lone pairs (resonance effect) How carbocations are stabilized by neighboring carbons atoms? The stability of carbocations decreases as the number of carbons attached to the C+ decreases. That means that tertiary carbocations are more stable than secondary that in turn are more stable than primary (Fig. 1). Fig. 1: Carbocation stability increases as methyl substitution increases around the electron deficient carbon C+. The methyl groups (-CH 3 ) are electron donating and therefore stabilize the positive charge (inductive ...
Read more

Standard Enthalpies of Formation of Organic Compounds

Standard Enthalpies of Formation of selected organic compounds Home > Fundamental Physical Constants - Chemical - Physical - Thermochemical Data > Standard Enthalpies of Formation of Inorganic Compounds > Standard Enthalpies of Formation of Organic Compounds Standard Enthalpies of Formation of Organic Compounds   The standard enthalpy of formation ΔΗ° f of a substance is the change in enthalpy for the reaction that forms 1 mol of the substance from its elements with all reactants and products at 1 atm pressure and usually 298.15 K. For any element in its most stable state at 298 K and 1 atm pressure, ΔΗ° f = 0. Standard enthalpies of formation of inorganic compounds were given in a previous post.   Table 1: Standard Molar Enthalpies of Formation ΔΗ° f at 25 °C (298.15K) Substance Formula ΔΗ° f   Acetylene C 2 ...
Read more

CHEMISTRY NET - INTRODUCTION - LIST OF TOPICS

Chemistry Net - Introduction - Table of Contents CHEMISTRY NET Analytical Chemistry Biological Chemistry Inorganic Chemistry Organic Chemistry Physical & Theoretical Chemistry Chemical News & Interesting / Chem. Data Chemistry is the understanding, the definition and the description of the structure and the behavior of matter, the matter that surrounds us and the matter we are consisting off. It is our history, our life and our future. It is sometimes called the central science because of its role in connecting the other physical sciences (physics, astronomy, earth sciences) with the life sciences (biology, medicine) and engineering. There are many approaches to studying this fascinating science but for convenience and historical reasons has been divided it into five fields: analytical , biological , inorganic , organic and physical chemistry. Chemistry is a challenging subject to teach and even more challenging to learn. This si...
Read more